4 INSTALLING PRINTER DRIVERS FOR MACINTOSH
110 Installing the Printer on Mac OS X 10.2.4 to Mac OS X 10.5.x
Configuring the installable options
The following describes an operation on Mac OS X 10.3.x. The procedure is the same when Mac OS X 10.2.4 to 10.2.8 is
used.
1
In the [Printer List] dialog box, select the printer and then select [Show Info] in the
[Printers] menu.
The Printer Info dialog box appears.
2
Select [Installable Options] in the drop down list box.
The [Installable Options] window is displayed.
3
Set the following options.
y Finisher
Not Installed — Select this if a finisher is not installed.
Multi-Position Stapler — Select this when the Finisher or Saddle Stitch Finisher is installed.
Multi-Position Stapler and Hole Punch — Select this when the Finisher or Saddle Stitch Finisher and Hole Punch
unit are installed.
Even if you select [Not Installed] for the Finisher option during print settings. The finisher options such as
stapling and hole punching can be selected. If you select the finisher options for printing but the finisher is not
installed, finisher settings will be ignored and printing will be performed correctly.
To Next Page
Loading...
