Kyocera TASKalfa 650c

5.INSTALLING PRINTER DRIVERS FOR UNIX/Linux
Setting Up the UNIX/Linux Filters 119
5 INSTALLING PRINTER DRIVERS FOR UNIX/Linux
Please use Bourne Shell(sh) to create a print queue manually.
Creating a print queue manually on Solaris
1
Log on to the root account.
2
Open your UNIX/Linux editor.
3
Create the following file.
/etc/lp/interfaces/<queue name>.conf
4
Add a line as below in the <queue name>.conf.
dest=<IP address>
5
Save the file.
6
Enter the following command:
chmod +x <queue name>.conf
7
Enter the following command:
chown lp:lp <queue name>.conf
8
Enter the following command:
lpadmin -p <queue name> -v /dev/null -I any \
-i /usr/lib/lp/model/net_kycolor
9
Enter the following command:
accept <queue name>
10
Enter the following command:
enable <queue name>
Creating a print queue manually on HP-UX
1
Log on to the root account.
2
Open your UNIX/Linux editor.
3
Create the following file.
/etc/lp/interface/<queue name>.conf
4
Add a line as below in the <queue name>.conf.
dest=<IP address>
5
Save the file.
6
Enter the following command:
chmod +x <queue name>.conf
7
Enter the following command:
chown lp:lp <queue name>.conf
8
Enter the following command:
ps -ef | grep lpsched | grep -iv grep > /dev/null 2>&1
9
Enter the following command:
echo $?
10
If “0” is outputted on the screen, turn the scheduler OFF. Enter the following
command:
/usr/sbin/lpshut > /dev/null 2>&1
11
Enter the following command:
/usr/sbin/lpadmin -p<queue name> -v/dev/null \
-mnet_kycolor -orm<queue name> -orpprint -ob3