Kyocera TASKalfa 650c - Page 136

5 INSTALLING PRINTER DRIVERS FOR UNIX/Linux
134 Setting Up the CUPS
Color Settings 1
Color Settings 2
Color Settings 3
Color Settings 4
Option Value Alternative Value Description
Color Type Auto
Color
Mono
Black and Red
Black and Green
Black and Blue
Black and Cyan
Black and Magenta
Black and Yellow
Black and White
Select whether a print job is printed in color, mono, or twin color.
Resolution 600dpi
, 1200dp Select a print resolution.
Distinguish Thin Lines Off
, On Select whether to distinguish thin lines or not.
Halftone Auto
Detail
Smooth
Select the appropriate processing on halftone images among
“Auto”, “Detail (high density)” and “Smooth (smooth tone
reproduction)”.
[Continue] button Determines the selected items.
Option Value Alternative Value Description
Black Over Print Off,
Text
Text and Graphics
Select whether printing background content that has black text
overlayed on it.
Image Type General
Photo
Presentation
Line Art
Select how colors are printed. The printer driver automatically
applies proper image quality for selected job type.
Pure Black and Gray Black - Auto
Black - Text
Black - Text and Graphic
Black - Text, Graphic and Image
Black and Gray - Auto
Black and Gray - Text
Black and Gray - Text and Graphic
Black and Gray - Text, Graphic and
Image
Select whether printing the black and gray scale contents in a
document using the black toner.
[Continue] button Determines the selected items.
Option Value Alternative Value Description
Color Balance - Black -4, -3, -2, -1, 0, 1, 2, 3, 4 Select the density for black toner.
Color Balance - Cyan -4, -3, -2, -1, 0
, 1, 2, 3, 4 Select the density for cyan toner.
Color Balance - Magenta -4, -3, -2, -1, 0
, 1, 2, 3, 4 Select the density for magenta toner.
Color Balance - Yellow -4, -3, -2, -1, 0
, 1, 2, 3, 4 Select the density for yellow toner.
[Continue] button Determines the selected items.
Option Value Alternative Value Description
Brightness -4, -3, -2, -1, 0, 1, 2, 3, 4 Select the brightness.
Contrast -4, -3, -2, -1, 0
, 1, 2, 3, 4 Select the contrast.
Saturation -4, -3, -2, -1, 0
, 1, 2, 3, 4 Select the saturation.
Sharpness -4, -3, -2, -1, 0
, 1, 2, 3, 4 Select the sharpness.
Background Adjustment -4, -3, -2, -1, 0
, 1, 2, 3, 4 Select the density level of the background.
[Continue] button Determines the selected items.