Kyocera TASKalfa 650c

1.OVERVIEW
Setting up NetWare Print Server 21
1 OVERVIEW
Enabling iPrint Service
After enabling DNS on the Printer Services Manager, enable the iPrint Service using the iManager.
y To do this, iManager must be installed on your NetWare server. For information about installing iManager, see the
documentation for iManager that is provided by Novell, Inc.
y You must use a supported browser to access iManager. The supported browsers vary depending on the version of
iManager that you installed.
For iManager 1.5.2
- Microsoft Internet Explorer 5.5 or later (Recommended)
- Netscape 6.2 or later
For iManager 2.0.x
- Microsoft Internet Explorer 6 SP1 or later (Recommended)
- Netscape 7.1 or later
- Mozilla 1.4 or later
1
Enter the URL “https://<IP address>:2200” in the address bar of your browser, and click
the [iManager] link for the NetWare server under eDirectory iManager.
2
Enter the user name and password to log in to iManager.
3
Click [iPrint] in the Contents Panel and click [Manage Printer].
4
Select the printer that you created for the equipment.
5
Click [Client Support] and click [iPrint support].
6
Select the [Enable iPrint support] check box.
7
If you want to secure printing, select the [Enable secure printing (Require SSL/TSL and
user authentication)] check box.
When the [Require Security] option is enabled, users must be authenticated to eDirectory using the user name and
password.
8
Click [Apply] and [OK] to save settings.
The IPPSRVR.NLM is automatically loaded.