2 RECOMMENDED INSTALLATION
30 Procedure for Recommended Installation
6
The installation starts.
y If the following message appears, click [Yes] to set the indicated printer driver to be the default printer driver,
or click [No] to not change the default printer driver.
y If the following message appears, click [Install this driver software anyway] to proceed with the installation.
7
When the installation is complete, click [Finish].
The main menu window is displayed.
The Installer may ask you to restart your computer. If it does, select “Yes, I want to restart my computer now.”
and click [Finish] to restart your computer.
8
Click [Exit].
When a message “Do you want to close HS Series software Installer” appears asking whether to finish the
installation, click [Yes].
Before using the printer driver for printing, please configure the installed options of the equipment and
department code (if required) on the printer driver. Please refer to the Printing Guide for the instructions.
To Next Page
Loading...
