3.INSTALLING PRINTER DRIVERS FOR WINDOWS
Other Installations 51
3 INSTALLING PRINTER DRIVERS FOR WINDOWS
9
The installation is completed.
Before using the printer driver for printing, please configure the installed options of the equipment and
department code (if required) on the printer driver. Please refer to the Printing Guide for the instructions.
Windows XP/Server 2003
Installing the printer driver for USB printing by Plug and Play
You must log into Windows as a user who has the “Administrators” or “Power Users” privilege. You must log into
Windows as a user who has the “Administrators” privilege when using Windows XP/Server 2003.
1
Power on this equipment and your computer.
2
Connect the USB cable to this equipment and your computer.
The [Found New Hardware Wizard] dialog box appears.
3
Select [Install from a list or specific location (Advanced)] and click [Next].
4
Select [Search for the best driver in these locations.] and select only the [Include this
location in the search] check box. Then click [Browse].
The [Browse For Folder] dialog box appears.
5
Insert the Client Utilities CD-ROM into the CD-ROM drive.
When inserting the Client Utilities CD-ROM, the installer may automatically start. Click [Exit] to exit the installer and
continue the operation.
To Next Page
Loading...
