Kyocera TASKalfa 650c - Page 62

3 INSTALLING PRINTER DRIVERS FOR WINDOWS
60 Other Installations
5
Select the [Select a shared printer by name] check box, enter “http://[IP address]:631/
Print” in the edit box in [Find by printer name or TCP/IP address] screen.
y Enter the IP address of this equipment instead of [IP address].
Example: IP address = 192.168.1.2
http://192.168.1.2:631/Print
y Enter the IPv6 address in the [Printer Name or IP Address] box when the MFP is connected in an IPv6 network.
y If your network uses a DNS or WINS server, enter the printer name of this equipment provided from DNS or
WINS instead of [IP address].
Example: Print Server Name = Mfp-05212774
http://Mfp-05212774:631/Print
y When you connect from the Internet, enter the FQDN of this equipment provided from DNS instead of [IP
address].
Example: URL = mfp_05212774.km.com
http://mfp_05212774.km.com:631/Print
“P” for “Print” in the IPP URL must be capitalized. When you are using on Windows Vista/Server 2008, the IPP
port can be created by entering “print” (non-capitalized) in the IPP URL, but the print job cannot be sent to the
equipment. In that case, delete the IPP port and then create the IPP port correctly again.
y If the IPP Port80 Enabled option is enabled on this equipment, you can exclude the port number from the
URL. (i.e. “http://192.168.1.2/Print”)
y If the Enable SSL option for IPP Print is enabled, you must enter “https://[IP address]:[SSL port number]/
Print” in the “URL” field.
(i.e. “https://192.168.1.2:443/Print”)