4.INSTALLING PRINTER DRIVERS FOR MACINTOSH
Installing the Printer on Mac OS X 10.2.4 to Mac OS X 10.5.x 85
4 INSTALLING PRINTER DRIVERS FOR MACINTOSH
3
Click [IP] and specify the items as described below.
Protocol: Line Printer Daemon - LPD
Address: <IP address or DNS name of this equipment>
Queue:print
Name: <Any Name>
Location: <Any Name>
Print Using: HS Series (or UK)
y In the [Name] box, the name that is entered in the [Address] box is automatically displayed.
y When you enter the IP address or DNS name of this equipment in the [Address] box, the correct PPD file is
automatically selected in the [Print Using] box. If the correct PPD is not automatically selected, select
[Select a driver to use] and select the PPD file displayed in the list.
4
Click [Add].
The [Installable Options] window appears.
5
Set the following options.
y Finisher
Not Installed — Select this if a finisher is not installed.
Multi-Position Stapler — Select this when the Finisher or Saddle Stitch Finisher is installed.
Multi-Position Stapler and Hole Punch — Select this when the Finisher or Saddle Stitch Finisher and Hole Punch
unit are installed.
Even if you select [Not Installed] for the Finisher option during print settings. The finisher options such as
stapling and hole punching can be selected. If you select the finisher options for printing but the finisher is not
installed, finisher settings will be ignored and printing will be performed correctly.
To Next Page
Loading...
