Kyocera TASKalfa 650c

1 SETUP FLOW
14 Setup Flow for Windows
For Novell Printing
A NetWare server is required in your network for Novell Printing.
You cannot print through the NetWare print server from Windows Vista.
 Connecting the GA-1310/E
Connect the GA-1310/E to your network with a network cable.
 Setting up the NetWare Server
Configure the NetWare Server for printing with GA-1310/E.
 Setting up TCP/IP
Configure the TCP/IP Setup options to assign the IP Address, Subnet Mask, and Gateway
Address on the GA-1310/E to enable Fiery WebSetup from the control panel.
 Setting up IPX/SPX (when using NetWare in IPX/SPX network)
Configure the IPX/SPX frame type for the GA-1310/E from Fiery WebSetup or Command Work-
Station.
REFERENCE for GA-1310/E
Configuration and Setup
PREPARING FOR GA-1310 SETUP
Connecting network cable to the GA-1310
REFERENCE
Configuration and Setup
CONNECTING TO THE NETWORK
Network server setup requirements
REFERENCE for GA-1310/E
Configuration and Setup
SETTING UP THE GA-1310 FROM THE COPIER TOUCH PANEL
Network Setup options
TCP/IP Setup options
IPv4 (TCP/IP) Setup
REFERENCE for GA-1310/E
Configuration and Setup
SETTING UP THE GA-1310 FROM THE CONTROL PANEL
Network Setup Options
Protocol Setup Options
IPX/SPX Setup