Kyocera TASKalfa 650c

Setup Flow for Windows 15
 Setting up the Printing Service
Enable the PServer Setup options and NDS Setup options (when using in NDS/NDPS mode), or
Bindery Setup options (when using in Bindery mode) from Fiery WebSetup or Command Work-
Station.
 Installing the Printer Driver
Install the printer driver to use Novell printing.
 Configuring the Options
Configure the option settings on the printer driver.
REFERENCE for GA-1310/E
Configuration and Setup
SETTING UP THE GA-1310 FROM THE CONTROL PANEL
Network Setup Options
Services Setup Options
PServer Setup Options
REFERENCE
 P.39 “Installing the Printer Driver for Novell Printing”
REFERENCE
 P.43 “Configuring the Option”