8-66
Setup and Registration (System Menu) > System Menu
Ping
[System Menu/Counter] key > [System/Network] > [Network] > [Ping]
Restart Network
[System Menu/Counter] key > [System/Network] > [Network] > [Restart Network]
IP Filter (IPv4)
[System Menu/Counter] key > [System/Network] > [Network] > [IP Filter (IPv4)]
IP Filter (IPv6)
[System Menu/Counter] key > [System/Network] > [Network] > [IP Filter (IPv6)]
Item Description
Ping Checks if communication with the destination by entering the host name or IP
address of the destination is possible.
If [Primary Network (Client)] is set to [Others], this item is not displayed.
Item Description
Restart Network Restarts the network.
Item Description
IP Filter (IPv4) Configure IP filters. IP filters restrict access to the machine based on the IP
addresses and protocols.
Specify the IP addresses or network addresses of the hosts to which access is
granted from Command Center RX. If nothing is specified on this page, access from
all hosts is allowed.
Value: Off, On
Command Center RX User Guide
Item Description
IP Filter (IPv6) Configure IP filters. IP filters restrict access to the machine based on the IP
addresses and protocols.
Specify the IP addresses or network addresses of the hosts to which access is
granted from Command Center RX. If nothing is specified on this page, access from
all hosts is allowed.
Value: Off, On
Command Center RX User Guide
To Next Page
Loading...
