Kyocera TASKalfa 7353ci - Page 455

8-65
Setup and Registration (System Menu) > System Menu
Security Settings
[System Menu/Counter] key > [System/Network] > [Network] > [Security Settings]
Proxy
[System Menu/Counter] key > [System/Network] > [Network] > [Proxy]
REST over SSL Select whether to communicate using REST over SSL.
*1, *2
Value: Off, On
NOTE
When selecting [On], it also requires a certificate for SSL. the default certificate is the
self-certificate of the machine.
Wi-Fi Direct Set whether to enable this function for each network.
Value: Disable, Enable
Wi-Fi
Wired Network
*1 The setting will be changed after restarting the device or network.
*2 Set "SSL" to [On] in Security Settings.
Security Settings
(page 8-65)
IMPORTANT
Depending on the protocol, there are models where you need to restart the network or turn the machine OFF
and then ON after changing the setting.
Item Description
SSL Select whether to use SSL for communication.
Value: Off, On
Item Description
Proxy Set the proxy for connection to the Internet from an application.
Value: Off, On
Use the Same Proxy
Server for All
Protocols
Set whether the same proxy server is used for all protocols. To use the same proxy
server, select the [Use the Same Proxy Server for All Protocols] checkbox.
Proxy Server (HTTP) Set a proxy server (HTTP).
Value: (Enter the proxy address and port number.)
Proxy Server (HTTPS) Set a proxy server (HTTPS). This setup is available when "Use the Same Proxy
Server for All Protocols" is [Off].
Value: (Enter the proxy address and port number.)
Do Not Use Proxy for
Following Domains
Set domains for which no proxy is used.
Value: (Enter the domain name.)
Item Description