ix
Size and Orientation of Originals and Paper
Original sizes and paper sizes such as A5 can be used in both the horizontal and vertical orientations. To
distinguish the orientations when these sizes are used, "R" is added to sizes used in the horizontal orientation. In
addition, the following icons are used to indicate original and paper placement orientations on the touch panel.
Orientation Setting Position
(X=Length, Y=Width)
Icons on the
touch panel
Indicated size in this
Guide
*1
*1 Original/paper sizes that can be used vary depending on the function and source tray. For details, refer
to the following.
Machine’s Operation Guide
Vertical
orientation
Original
Original Original
A5
Paper
Paper Paper
Horizontal
orientation
(-R)
Original
Original Original
A5-R
Paper
Paper Paper
To Next Page
Loading...
