Kyocera TASKalfa MA3500ci - Fax TX Report; Detect Folded Coner Orig; Quiet Mode; Manual Send

3-27
Sending Faxes > Fax TX Report
Fax TX Report
You can check whether FAX was transmitted properly by printing the report after transmission.
Detect Folded Coner Orig.
When scanning a document from the document processor, scanning is automatically stopped when a document
with a folded corner is detected.
If a folded corner is detected, straighten it before resuming scanning.
Quiet Mode
Lower print and scan speed for quiet processing. Select this mode when the running noise is uncomfortable.
(Value: [Off] / [On])
Manual Send
This method allows you to send originals by pressing the [Start] key after confirming that the telephone line has
connected to the receiving system.
Item Description
Off Does not print reports.
On Prints reports.
Error Only Prints reports only if an error occurs.
NOTE
This setting is displayed if Fax TX Result Reports is set to [Specify Each Job].
Send Result Reports (page 7-7)
Item Description
On If a folded corner is detected, stops the scanning of the original document.
Off It does not detect.
NOTE
Connecting a telephone set (commercially available product) to this machine enables you to talk with the
person at the receiving system before sending originals.
Manual Send (page 5-38)