5-6
Using Convenient Fax Functions > Forwarding Detail Settings
File Separation
When sending by e-mail transmission, folder (SMB) transmission, or folder (FTP) transmission, specify whether
File Separation is performed.
1
Display the screen.
Follow steps 1 of Forward Settings.
2
Configure the function.
Select “File Separation” [Each Page] or [Off] > [OK]
To create one file per page, select [Each Page].
Email Subject Add. Info. Setting
Specify whether any information will be added to the subject of the E-mail. When adding information, you can
select either Sender Name or Sender.
1
Display the screen.
Follow steps 1 of Forward Settings.
2
Configure the function.
Select “Email Subject Add. Info” [
Sender Name
], [
Sender Fax No./Address
], or [
Off
] > [
OK
]
FTP Encrypted TX Setting
Specify whether to use FTP encryption when you send data.
1
Display the screen.
Follow steps 1 of Forward Settings.
2
Configure the function.
Select "FTP Encrypted TX" [On] or [Off] > [OK]
Forward Settings (page 5-3)
Forward Settings (page 5-3)
To use FTP encryption, set "SSL" to [On] in the Security settings.
Machine’s Operation Guide
Forward Settings (page 5-3)
To Next Page
Loading...
