Kyocera TASKalfa MA3500ci - Border Erase;Full Scan

3-23
Sending Faxes > Border Erase/Full Scan
Border Erase/Full Scan
Erases the black border that forms around the image. The following modes are available.
Item Value Description
Standard - Read the source document with
Standard Mode. (Border Erase Width: 2
mm)
Full Scan - Scan without erasing borders around
the original.
Border Erase
Sheet
Border Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch: 0.00 to 2.00"
(in 0.01" increments)
Set the border erase width.
*1
Use [+], [-] or the numeric keys to set the
value.
*1 The input units can be changed in System Menu.
Machine’s Operation Guide
Back Page Same as Front Page, Do Not
Erase
For 2-sided originals, select [Back Page]
and then select [Same as Front Page]
or [Do Not Erase].
Border Erase
Book
Border Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch: 0.00 to 2.00"
(in 0.01" increments)
Set the border erase width.
*1
Use [+], [-] or the numeric keys to set the
value.
Back Page Same as Front Page, Do Not
Erase
For 2-sided originals, select [Back Page]
and then select [Same as Front Page]
or [Do Not Erase].
Individual
Border Erase
Border Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch: 0.00 to 2.00"
(in 0.01" increments)
Set the border erase width.
*1
Use [+], [-] or the numeric keys to set the
value.
Back Page Same as Front Page, Do Not
Erase
For 2-sided originals, select [Back Page]
and then select [Same as Front Page]
or [Do Not Erase].
Original
Orientation
Top Edge on Top, Top Edge on
Left
Select the orientation of the original
document top edge to scan correct
direction. Select [
Original Orientation ] to
choose orientation of the originals, either
[
Top Edge on Top ] or [ Top Edge on Left ].