Kyocera TASKalfa MA3500ci - Part Names and Functions; Machine

2-2
Before Using the Fax Machine > Part Names and Functions
Part Names and Functions
Machine
This chapter explains the names of parts when the machine is used as a fax machine. For the parts required
when functions other than FAX are used, refer to the following:
Machine’s Operation Guide
1 Operation panel Perform the fax operation with this panel.
2 Power switch Set this switch to the ON side when performing the fax or copier operation.
The touch panel lights to enable operation.
3 LINE connector Connect the modular cord for the telephone line to this connector.
4 TEL connector When using a commercially available telephone set, connect the modular
cord to this connector.
IMPORTANT
You cannot automatically receive a fax when the power switch is turned off.
1
2
3
4