Kyocera TASKalfa MA3500ci - Page 180

8-7
Fax Settings > Default FAX settings
Result Report Setting
[Home] key > [...] > [System Menu] > [Notification/Report] > "Result Report Setting"
Fax Communication Report
[Home] key > [...] > [System Menu] > [Notification/Report] > "Fax Communication Report"
Item Description
Send Result Report Each time you send a fax, you can print a report to confirm whether the fax was
sent successfully.
Send Result Reports (page 7-7)
RX Result Configure settings for FAX RX Result Report.
Fax RX Result Report When a fax is received, you can be notified by receipt result report.
FAX RX Result Reports (page 7-9)
RX Result Report
Type
Fax receipt can also be notified by e-mail instead of checking the receipt result report.
Reporting FAX Receipt Result by E-mail (page 7-12)
Job Finish Notice Setting Attaches sent images to job finish notices.
Value: Do Not Attach Image, Attach Image
Item Description
Outgoing Fax Report Configure settings for Outgoing FAX report.
Auto Print An activity report is printed out automatically after every 50 faxes sent.
Value: On, Off
Activity Report (Outgoing FAX Report and Incoming FAX Report) (page 7-10)
Print Report Prints the sent fax report.
Incoming Fax Report Configure settings for Incoming FAX report.
Auto Print An activity report is printed out automatically after every 50 faxes received.
Value: On, Off
Activity Report (Outgoing FAX Report and Incoming FAX Report) (page 7-10)
Print Report Prints the received fax report.