KYORITSU KEW 2003A - Page 4

 2 
The symbol #  indicated on theinstrument means that the user
must refer to related parts in the manual for safe operation of the
instrument.
Besure tocarefullyreadthe instructionsfollowingeach
#  symbol
inthismanual.
# DANGERisreserved for conditions and actions thatare likely
tocauseseriousorfatalinjury.
# WARNINGisreserved forconditionsand actionsthatcan cause
seriousorfatalinjury.
# CAUTIONis reserved for conditionsandactions that can cause
minorinjuryorinstrumentdamage.
Following symbols are used on the instrument and in the instruction
manual.Attentionshouldbepaidtoeachsymboltoensureyoursafety.
#
This symbol is marked where the user must refer to the
instruction manual so as not to cause personal injury or
instrumentdamage.

Indicatesaninstrumentwithdoubleorreinforcedinsulation.
Indicates that this instrument can clamp on bare conductors
when measuring a voltagecorrespondingtothe applicable
Measurementcategory,whichismarkednexttothissymbol.

IndicatesAC(AlternatingCurrent).

IndicatesDC(DirectCurrent).
IndicatesACandDC.
# DANGER
󱾀 Nevermakemeasurementonacircuitinthefollowingcategories;
Measurementcategory Ⅳ (CAT. Ⅳ ) :overAC/DC600V
Measurementcategory Ⅲ (CAT. Ⅲ )orlower :overAC750V/DC1000V
󱾀 Do not make measurement when thunder is rumbling. Stop
measurementandtakeofftheinstrumentfromtheobjectundertest.
󱾀 Do not attempt to make measurement in thepresence of