16
The Safety Chain (Travel Trailer)
Safety chain requirements will vary from state to state. The chain
supplied with your coach meets SAE requirements for maximum
gross trailer weight.
1. Cross the left chain under the coupler and attach to the right
mounting slot in the trailer hitch.
2. Repeat step one with the right chain. Slack for each length
should be the same but not more than necessary to permit the
vehicle to turn at their minimum radius.
TRAVELING_______________________________________
Weights
For safety reasons and federal regulations KZRV provides accurate
weight specifications to owners. On the exterior left front corner of
the coach you will find the Federal “Vehicle Identification Number”
sticker, as required by the federal government. This tag supplies
information concerning your coach, such as: VIN number, date/
month of manufacture, tire size rating, plus information about
weights as described below, and the following page.
Remember – always have the safety chain attached to tow vehicle, as
required in your state.
CAUTION
!
PDF created with pdfFactory trial version www.pdffactory.com
To Next Page
Loading...
