11. If the problem arises because additional settings on your router are required, you will be headed to
the following screen.
Your Wi-Fi network configuration prevents devices from communicating with LaMetric. In order to
resolve this issue, you will need to disable AP (access point) isolation, AP isolation (also known as
'Client Isolation' or 'Guest Mode') on your router. Please refer to your router documentation to learn how
to disable AP isolation.
If you do not have access to your router settings, or if you are attempting to connect through a guest,
hotel or public network with AP/client isolation, you will be unable to set up your LaMetric.If you are
attempting to connect through a Wi-Fi extender, please check your extender settings. You will need to
disable AP isolation on your Wi-Fi extender before setting up LaMetric to work with your Wi-Fi network.
15
To Next Page
Loading...
