(850) 610-2870 www.lanesharkusa.com 17
Lane Shark LS-3COMPONENTS
(01) MOTOR MRLS3D00002022A
The motor is the main component of the Lane Shark LS-3. The 5.5 GPM
Danfoss gear motor is equipped with two #10 ORB (O-Ring Boss) inlets. It
is secured to the motor mount via two 1/2-14x1.5” socket caps with a 3/8
head (A) shown in gure 2. In order for the Lane Shark brush cutter to
operate to full potential, the tractor must have a hydraulic ow rate of at
least 5 GPM, optimal ow is 5.5 GPM. Hydraulics are linear, 5.5 GPM equals
100% of the optimal ow, 5 GPM equals 95% of the optimal ow and so on.
Figure 1
Figure 2
To Next Page
Loading...