(850) 610-2870 www.lanesharkusa.com 18
Lane Shark LS-3
COMPONENTS
Hydraulic Hoses
The Lane Shark LS-3 requires two hydraulic hoses to operate. (NOT
INCLUDED) One for pressure (02) and one for the return (03). To run the
Lane Shark, YOU MUST HAVE AUXILIARY HYDRAULICS such as rear remotes,
third function, or a Lane Shark valve kit. Only the pressure comes from the
auxiliary hydraulics, and return MUST be to the SUMP.
(CANNOT RETURN THROUGH REMOTES). When using ORB, a minimum
inside diameter of 3/8” is required.
IMPORTANT INFORMATION
• YOUR TRACTOR MUST HAVE AUXILIARY HYDRAULICS!
• DO NOT RETURN THROUGH REAR REMOTES!
• ONLY RETURN TO THE SUMP!
• NOT COMPATIBLE WITH DIVERTER VALVES!
To Next Page
Loading...