(850) 610-2870 www.lanesharkusa.com 35
Lane Shark LS-3LUBRICATION
Main Pivot Point
The main pivot point is where the main pivot arm attaches the deck
of the Lane Shark to the mounting plate. This point allows all movement
of the Lane Shark and must be properly maintained. To maintain the main
pivot point it must always be properly greased before use. The main pivot
point is located on the left side of the Lane Shark and is surrounded by a
red circular plate. The Pivot point is equipped with one grease tting. It is
recommended to check the main pivot point prior to every use. To check the
main pivot point you need to rotate the main adjustment arm. If the main
adjustment arm rotates with no resistance or feels loose the pivot point
needs to be greased.
To Next Page
Loading...