LaneShark LS-3 - User Manual

(850) 610-2870 www.lanesharkusa.com 1
• Always disconnect hoses prior to making adjustments or servicing.
• Must be 18 years or older to operate the Lane Shark.
• Never raise the Lane Shark above oorboard height when in the
horizontal position.
• Keep body and clothing away from all moving parts.
• Do NOT attempt to change positions or repair the Lane Shark while
hydraulic hoses are connected.
• Use the machine only for the intended use. Do NOT modify the machine.
• Do NOT use if any parts are missing or damaged. Follow instructions at all
times while operating the Lane Shark. Failure to follow these instructions
could result in serious injury or death.
LS-3 OWNER’S MANUAL
READ ENTIRE MANUAL BEFORE OPERATION
Lane Shark LS-3 Hydraulic Rotary Cutter
Important operation and safety instructions can be found
immediately on the internet by scanning these codes with your
smartphone device’s camera.
Position Change
Safety Video
Hydraulic
Plumbing Video

Summary

SAFETY INFORMATION

SAFETY PRECAUTIONS

General safety warnings and guidelines for operation.

SAFETY LABELS

Details and placement of all safety warning labels on the machine.

INTRODUCTION

GENERAL INFORMATION

Overview of the Lane Shark LS-3's features and capabilities.

OVERVIEW

Component identification and diagram of the Lane Shark LS-3.

COMPONENTS

CUTTING DECK

Main platform supporting rotating assembly and adjustment components.

BACKPLATE

Main support system and connection point for tractor mounting.

SWING ARM

Connects backplate and cutting deck, allowing positional movement.

KICKSTAND

Supports the LS-3 in vertical and extended positions.

ROTATING ASSEMBLY

Details components like motor, shaft, and blade carrier.

MOTOR

The primary hydraulic motor driving the cutting mechanism.

HYDRAULIC HOSES & PLUMBING

Requirements, installation, and connection of hydraulic hoses.

BLADE CARRIER

Holds and allows rotation of cutting blades.

CUTTING BLADES

Information on blade type, attachment, and maintenance.

BLADE REPLACEMENT

Step-by-step guide for replacing or flipping cutting blades.

SAFETY CHECKLIST

PRE-OPERATION & PERIODIC CHECKS

Comprehensive pre-operation and periodic maintenance checks.

OPERATING INSTRUCTIONS

MOUNTING PROCEDURES

Step-by-step guide for attaching the Lane Shark to tractors.

CUTTING OPERATIONS

How to operate the Lane Shark for various cutting tasks and material types.

TROUBLESHOOTING

Solutions for common operational issues like jamming or stalling.

SAFETY REQUIREMENTS

Essential safety protocols and precautions for operating the machine.

ADJUSTMENTS

TRANSITION PROCESS

How to change the Lane Shark's cutting positions.

DIRECTLY IN FRONT (HOME) POSITION

The standard transport, storage, and mounting position.

OFFSET POSITION

How to extend the Lane Shark beside the tractor for cutting.

VERTICAL POSITION

How to orient the Lane Shark for vertical cutting tasks.

LUBRICATION

MAIN PIVOT POINT

Location and maintenance of the main pivot point for greasing.

MAINTENANCE

GENERAL MAINTENANCE CHECKS

Routine checks for longevity and safe operation.

STORAGE

PREPARING UNIT FOR STORAGE

Steps to prepare the machine for long-term storage.

LIMITED WARRANTY

WARRANTY INFORMATION

Details on warranty coverage, exclusions, and claims.

REFERENCE MATERIAL

GLOSSARY OF TERMS

Definitions of technical terms used in the manual.

PARTS BREAKDOWN

List of components, quantities, tools, and part numbers.

FREQUENTLY ASKED QUESTIONS

Answers to common questions about operation and troubleshooting.

NOTES

Blank space for user notes.

LaneShark LS-3 Specifications

General

Brand	LaneShark
Model	LS-3
Category	Cutter
Language	English