(850) 610-2870 www.lanesharkusa.com 37
Lane Shark LS-3STORAGE
Overview
To keep your Lane Shark in its best condition, we recommend
following the storage procedures listed below. It will also make sure
your Lane Shark is o to a good start when needed. If your Lane
Shark is going to be stored for long periods of time we STRONGLY
recommend following these procedures to increase the life of your
Lane Shark.
Preparing Unit for Storage
1. Complete maintenance checklist.
2. Clean all mud, dirt, and debris from the Lane Shark.
3. Tighten any loose hardware.
4. Replace any safety/warning decals if damaged or illegible.
5. Touch up any chipped or scratched areas.
6. Connect hydraulic lines into each other.
7. Store the unit in a dry area.
Removing from Storage
1. Complete maintenance checklist.
2. Complete safety checklist
3. Clean all mud, dirt, and debris from the Lane Shark.
4. Tighten any loose hardware.
5. Replace any safety/warning decals if damaged or illegible.
6. Touch up any chipped or scratched areas.
7. Connect hydraulic lines into each other.
8. Store the unit in a dry area.
Proper storage position shown below:
To Next Page
Loading...