Lantronix EDS32PR User Manual

10: Maintenance and Diagnostics Settings
EDS Device Servers User Guide 118
Diagnostics: DNS Lookup Page
Clicking DNS Lookup from one of the Diagnostics pages displays the Diagnostics: DNS
Lookup page. Here you can specify a DNS Hostname for a forward lookup or an IP
address for a reverse lookup. You can also perform a lookup for a Mail (MX) record by
prefixing a DNS Hostname with a '@'.
Figure 10-11. Diagnostics: DNS Lookup Page
Diagnostics: DNS Lookup Page
Diagnostics: DNS
Lookup Page
Settings
Description
Host Perform one of the following:
For reverse lookup to locate the hostname for that IP address,
enter an IP address.
For forward lookup to locate the corresponding IP address, enter
a hostname.
To look up the Mail Exchange (MX) record IP address, enter a
domain name prefixed with “@”.
Diagnostics: Memory Page
Clicking Memory from one of the Diagnostics pages displays the Diagnostics: Memory
page. This read-only page shows the total memory and available memory (in bytes),
along with the number of fragments, allocated blocks, and memory status.
The Diagnostics: Memory page also shows the current amount of available memory.

Lantronix EDS32PR Specifications

General

Certification	UL/CUL, FCC, CE, TUV, C-Tick, GS, CB scheme, VCCI FCC Part 15 Statement Class A Device, ICES-003 Class A Device, C-Tick, VCCI, CE Marking, UL-CUL Mark, TUV-GS Mark, RoHS FCC CFR 47 Part 15 Subpart B, ICES-003 Issue 4, AS/NZS CISPR 22, VCCI V-3, EN55022, EN61000-3-2, EN61000-3-3, EN55024, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11
Networking standards	IEEE 802.3
Serial interface type	RS-232
Serial ports quantity	32
Ethernet LAN data rates	10, 100 Mbit/s
Cabling technology	10/100Base-T(X)
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	1
Security algorithms	SSH
Supported network protocols	HTTP, HTTPS, FTP, TFTP, Telnet, TCP, UDP, LPD, XML, DHCP, SSHv2, SSLv3, SNMPv2, AutoIP, RSS, ARP, ICMP, SYSLOG, AES, SMTP, DNS, BOOTP, Traceroute
Built-in processor	Intel XScale IXP420
Processor frequency	266 MHz
Compatible operating systems	Windows 98/ME/NT/2000/XP/Vista
Flash memory	8 MB
RAM capacity	64 MB
LED indicators	LAN
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Input voltage	100 - 240 V
Safety	UL 60950-1, CSA-22.2 No.60950-1-03, EN60950-1, CB Report - IEC 60950-1