Network
E220 Series Cellular Router User Guide 132
Parameters Description
The default name is Maestro E200.
Network Select LAN for the Access Point or WWAN for Client Mode to
configure the Router as LAN or WWAN respectively.
Hide ESSID Select Hide SSID, to hide SSID when client machines scan for
available Wi-Fi networks.
WMM Mode Wi-Fi Multimedia (WMM), is a subset of the 802.11e wireless LAN
(WLAN) specification that enhances quality of service (QoS) on a
network by prioritizing data packets.
Note
• 802.11n spec requires devices to support 802.11e (Quality of
Service [QoS] enhancements for wireless LAN) in order to
use HT (High Throughput) link rates, i.e. higher than 54
Mbps. WMM's Traffic Identifier (TID) field is key to
aggregation mechanisms, including block
acknowledgement (block ACK), that enable 802.11n's high
throughput rates.
Since WMM support is required for products to be certified for
802.11n, WMM comes enabled by default in all Wi-Fi Certified n APs
and wireless routers. So even if you don't have any WMM-aware
devices on your network, leave WMM enabled or you may find your
clients connecting only at 54 Mbps rates.
Table 10.3-4: General Wireless Connection Configurations for a New Interface
To Next Page
Loading...
Need help?
General