8: Setup Mode: Channel Configuration
UDS2100 Device Server User Guide 59
Telnet Terminal Type
This parameter displays only if you enabled the terminal type option in
Disconnect Mode. With this option enabled, you can use the terminal name for
the Telnet terminal type. Enter only one name.
With terminal type option enabled, the unit also reacts to the EOR (end of record)
and binary options, useful for applications like terminal emulation to IBM hosts.
Channel (Port) Password
This parameter appears only if the channel (port) password option is enabled in
Disconnect Mode. With this option enabled, you can set a password on the serial
port. The default setting is all 0s (i.e., no password).
To Next Page
Loading...
