Lantronix XPort User Guide

XPort® Device Server User Guide 82
Figure 10-2. TFTP Window
6. Click the Upload Now button to transfer the file to the unit. The unit performs a power
reset after the firmware has been loaded and stored.
After the firmware has been loaded and stored, which takes approximately 8 seconds to
complete, the unit performs a power reset.
Using TFTP: Command Line Interface
To download new firmware from a computer:
1. Enter the following from a TFTP command line interface:
tftp –i <ip address> put <local filename> <destination file name>
The following examples below demonstrate the TFTP command sequence to download the
.rom file and the .cob file for each XPort model.
For XPort-05 modules:
tftp –i 192.168.1.111 put xpt05_61000.rom X9
tftp –i 192.168.1.111 put xpt_webm_2005.cob WEB1
For XPort-03 and XPort-04 modules:
tftp –i 192.168.1.111 put xpt05_61000.rom X9
tftp –i 192.168.1.111 put xpt_webm_2005.cob WEB1

Lantronix XPort Specifications

General

Data Link Protocol	Ethernet, Fast Ethernet
Connectivity Technology	Wired
Form Factor	Embedded
Category	Embedded Systems
Interface	Serial
Serial Ports	1
Operating Temperature	0°C to 70°C