Lantronix XPort User Guide

4: Configuration Using Web Manager
XPort® Device Server User Guide 27
To configure the XPort module’s host list:
1. On the main menu, click Hostlist.
Figure 4-5. Hostlist Settings
2. Enter or modify the following fields:
Retry Settings
Retry Counter
Enter the value for the number of times the XPort device
server should attempt to retry connecting to the host list.
Retry Timeout
Enter the duration (in milliseconds) the XPort unit should
abandon attempting a connection to the host list.
Host Information
Host Address
Enter or modify the host’s IP address.
Port
Enter the target port number.
3. When you are finished, click the OK button.
4. On the main menu, click Apply Settings.
Channel 1 Configuration
The Channel 1 configuration defines how the serial port responds to network and serial
communication.

Lantronix XPort Specifications

General

Data Link Protocol	Ethernet, Fast Ethernet
Connectivity Technology	Wired
Form Factor	Embedded
Category	Embedded Systems
Interface	Serial
Serial Ports	1
Operating Temperature	0°C to 70°C