XPort® Device Server User Guide 16
3. Using DeviceInstaller
This chapter covers the steps for getting the XPort device server online and viewing its
current configuration.
Note: DeviceInstaller is a free utility program provided by Lantronix that discovers,
configures, upgrades, and manages Lantronix Device Servers. It can be downloaded
from the Lantronix website at www.lantronix.com/support/downloads.
For instructions on using DeviceInstaller to configure the IP address and related
settings or for more advanced features, see the DeviceInstaller Online Help.
Installing DeviceInstaller
To install DeviceInstaller:
1. Download the latest version of DeviceInstaller from http://www.lantronix.com/downloads
.
2. Run the executable to start the installation process.
3. Respond to the installation wizard prompts. (If prompted to select an installation type,
select Typical).
Assigning an IP Address
The unit’s IP address must be configured before it can work correctly on a network. You have
several options for assigning an IP to your unit. We recommend that you manually assign the
IP address over the network using DeviceInstaller.
Note: To use a serial connection instead of an Ethernet connection to configure the device,
see 5 Configuration via Telnet or Serial Port (Setup Mode) on page 42.
The unit’s IP address is normally set to 0.0.0.0 at the factory. The hardware address is on the
product label. The unit is DHCP enabled as the default.
To assign an IP address manually:
1. Click Start
All Programs
Lantronix
DeviceInstaller 4.3
DeviceInstaller. If your
PC has more than one network adapter, a message displays. Select an adapter and click
OK.
Note: If the unit already has an IP address (e.g., DHCP has assigned an IP address), click
the Search icon and select the unit from the list of Lantronix device servers on the local
network.
2. Click the Assign IP
icon.
To Next Page
Loading...
Need help?
General
