Lars Thrane LT-3100 - External I;O Configuration via Web Server

LT-3100 User & Installation Manual Rev. 1.06 Web server
Lars Thrane A/S www.thrane.eu Page 112 of 155
Static
The Static mode must be used when the IP-address of the LT-3110 Control Unit must never change.
Typically used, if connecting the LT-3110 Control Unit to an IP-network, where a DHCP server is already
available, and where it is important that the IP-address assigned for the LT-3110 Control Unit is never
changed.
NOTE: If the user changes DNS all clients’ needs to be rebooted as changes does not apply
automatically
Figure 151: Web server – Network (Static mode)