LT-3100 User & Installation Manual Rev. 1.06 Web server
Lars Thrane A/S www.thrane.eu Page 111 of 155
DHCP Server
The DHCP server mode must be used when connecting the LT-3110 Control Unit directly to another IP-
device or local network, where no DHCP server is offered, and where it is required that a DHCP server is
offered for assigning IP-addresses to network clients. The web server DHCP server mode setting is
illustrated in Figure 150.
NOTE: A user scenario for configuration the DHCP server mode is when e.g. connecting IP-based
communication devices: Analogue Phone Adapter, SIP Phones, or the RedPort Optimizer
directly to the LT-3110 Control Unit via the Ethernet interface. Connecting an Analogue
Phone Adapter is further described in Analogue Phone Adapter on page 67.
To Next Page
Loading...
