Launch TLT235SBA - Grease and Hydraulic Oil for Lift

LAUNCH Electronic Two-post User’
s Manual
54
Grease and hydraulic oil for lift
2# lithium based lubrication grease
Item Quality Index
Conical degree （ 1/10mm ）
278
Dripping point ℃
185
Corrosion （ T2 copper sheet ， 100 ℃， 24h ）
No change for copper sheet
Copper mesh oil split （ 100 ℃， 22h ） %
4
Evaporation （ 100 ℃， 22h ） %
2
Oxidation stability （ 99 ℃， 100 h ）
0.2
Anti-corrosion （ 52 ℃， 48 ）
Class 1
Impurity (microscope) / （ pcs/cm³ ）
Above 10µm no more than
Above 25µm no more than
Above 75µm no more than
Above 125µm no more than
5000
3000
500
0
Similar viscosity （ -15 ℃， 10s
-1
）
,/(Pa·s)
no more than
800
Water spray loss （ 38 ℃， 1h ） (%)
no more than
8
N32 hydraulic oil (used for low ambient temperature)
Item Quality Index
Kinematic viscosity 40 ℃
28.8 ～ 35
Pour point / ℃ no higher than -15
Flash point / ℃ no lower than 175
N46 hydraulic oil (used for high ambient temperature)
Item Quality Index
Kinematic viscosity 40 ℃
41.4 ～ 50.6
Pour point / ℃ no higher than -9
Flash point / ℃ no lower than 185
(C) Diagtools; www.diagtools.eu; diagtools@diagtools.lv; Pernavas 43A, Riga, Latvia, LV-1009; +37129416069