II
www.x431.com +86 755 8455 7891
LAUNCH
PAD VII
User Manual
IMPORTANT SAFETY INFORMATION
DANGER
When an engine is operating, keep the service area well-ventilated or attach a building exhaust removal
system to the engine exhaust system. Engines produce various poisonous compounds (hydrocarbon,
personal injury.
WARNING
Read all safety warnings and instructions.
*Note: Failure to follow the warnings and instructions may result in electric shock, re and/or serious injury.
1. Always perform automotive testing in a safe environment.
2. Do not connect or disconnect any test equipment while the ignition is on or the engine is running.
3. DO NOT attempt to operate the tool while driving the vehicle. Have second personal operate the
tool. Any distraction may cause an accident.
4.
5. NEVER smoke or allow a spark or flame in vicinity of battery or engine. Do not operate the tool in
6.
7.
8. Put blocks in front of the drive wheels and never leave the vehicle unattended while testing.
9. Use extreme caution when working around the ignition coil, distributor cap, ignition wires and spark
plugs. These components create hazardous voltage when the engine is running.
10. To avoid damaging the tool or generating false data, please make sure the vehicle battery is fully
11.
automotive batteries should be avoided. Keep the ignition sources away from the battery at all times.
12. Keep the tool dry, clean, free from oil, water or grease. Use a mild detergent on a clean cloth to clear the
outside of the equipment when necessary.
13. Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts.
14. Store the tool and accessories in a locked area out of the reach of children.
15. Do not use the tool while standing in water.
16. Do not expose the tool or power adaptor to rain or wet conditions. Water entering the tool or power
adaptor increases the risk of electric shock.
To Next Page
Loading...
