Safety & Accessory
Initial Use
Diagnostics
FAQ & Care
Product Prole
68
www.x431.com +86 755 8455 7891
LAUNCH
PAD VII
User Manual
14 FAQ
14.1 About X-431 PAD VII
1. How to save power?
Set a shorter standby time.
Decrease the brightness of the screen.
2. Communication error with vehicle ECU?
1. Whether the SmartLink C device is correctly connected.
2. Whether ignition switch is ON.
3. Failed to enter into vehicle ECU system?
1. Whether the vehicle is equipped with this system.
2. Whether the SmartLink C device is correctly connected.
3. Whether ignition switch is ON.
4. How to reset the tablet?
been backed up.
Do the following to reset the tablet:
1. Tap Settings -> System -> Reset options.
2. Tap Erase all data (factory reset).
3. Tap RESET TABLET.
4. Tap ERASE EVERYTHING to start resetting until the tool automatically reboots.
5. How to download the X-431 PAD VII App after resetting the tablet?
Note: Before registraon, please make sure the network is properly connected.
After the tablet has been successfully reset, follow the steps below to download the App:
2. Tap Login, input the username and password and tap Log In.
3. Make sure that the serial number is correct, tap APP application program and tap the Download icon to
start downloading.
4. After the download is complete, follow the on-screen instructions to install it.
5. After installation, use the existing username and password to login and go to update center to download
the diagnostic software.
6. What to do if the language of vehicle diagnostic software does not match the system language?
English is the default system language of the tool. After the system language is set to the preference
language, please go to the update center to download the vehicle diagnostic software of the corresponding
language.
language is under development.
To Next Page
Loading...
