Safety & Accessory
Initial Use
Diagnostics
FAQ & Care
Product Prole
66
www.x431.com +86 755 8455 7891
LAUNCH
PAD VII
User Manual
13 J2534 Reprogramming Using SmartLink C
vehicles. As part of the 21st Century Tune-up, reprogramming is often the only solution for problems ranging
from drivability and loss of power to poor fuel economy and emissions related issues. SmartLink C makes
reprogramming.
13.1 As a Local J2534 PassThru Device
PassThru device, working together with the PC installed with the OEM diagnostic software to perform the
downloaded from www.cnlaunch.com.
13.2 As a Remote J2534 PassThru Device
C.
documentation can be downloaded from www.cnlaunch.com.
Ensure that the remote reprogramming operation is performed after the SmartLink C is connected to the
To Next Page
Loading...
