Launch X-431 PAD VI - 9.3.2 Unbinding

Safety & Accessory
Initial Use
Diagnostics
FAQ & Care
Product Prole
48
www.x431.com +86 755 8455 7891
LAUNCH
PAD VII User Manual
Note: Serial Number is a 12-digit number starng with 90002 - you can nd it on the back of the tool/from the
password envelope. Acvaon Code is a 8-digit number stored in the password envelope included with the device.
4. Enter the required information. After inputting, tap Bind
Repeat steps 3~4 to bind multiple X-431 TSGUN devices to the tablet.
9.3.2 Unbinding
This function enables you to unbind the X-431 TSGUN and use it on other diagnostic tools.
Follow the steps below to proceed:
1. Tap TPMS on the Job menu.
2. Tap Bind TSGUN to enter.
3. Tap UNBIND, and then tap YES