Safety & Accessory
Initial Use
Diagnostics
FAQ & Care
Product Prole
36
www.x431.com +86 755 8455 7891
LAUNCH
PAD VII
User Manual
automatically compensate according to the driving conditions so as to achieve more comfortable and
better shift quality.
6.13 AFS (Adaptive Front-lighting System) Reset
This feature is used to initialize the adaptive headlamp system. According to the ambient light intensity, the
adaptive headlamp system may decide whether to automatically turn on the headlamps, and timely adjust
the headlamp lighting angle while monitoring the vehicle speed and body posture.
6.14 Sunroof Initialization
temperature threshold outside the car etc.
6.15 Suspension Calibration
1. This function can adjust the height of the body.
2. When replacing the body height sensor in the air suspension system, or control module or when the
vehicle level is incorrect, you need to perform this function to adjust the body height sensor for level
calibration.
6.16 EGR Adaption
6.17 Seats Calibration
This function is applied to match the seats with memory function that are replaced and repaired.
6.18 Tyre Reset
6.19 Coolant Bleed
Use this function to activate the electronic water pump before venting the cooling system.
6.20 AdBlue Reset (Diesel Engine Exhaust Gas Filter)
6.21 NOx Sensor Reset
NOx fault is re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalytic
converter learned value stored in the engine ECU.
To Next Page
Loading...
