Launch X-431 PAD VI - 5 Start Diagnostics; 5.1 Intelligent Diagnose

Safety & Accessory
Initial UseDiagnosticsFAQ & Care
Product Prole
17
www.x431.com +86 755 8455 7891
LAUNCH
PAD VII User Manual
5 Start Diagnostics
5.1 Intelligent Diagnose
Through simple Wi-Fi communication between the tablet and SmartLink C device, you can easily get

successfully identified, the system will retrieve it from the remote server and then guide you to vehicle
information page without the necessity of step-by-step manual menu selection.
The vehicle information page lists all historical diagnostic records of the vehicle, which lets the technician

function are also available on this page for reducing the roundabout time and increasing productivity.
Notes:
• Before using this funcon, please make sure the SmartLink C device is properly connected to the vehicle’s DLC.
For detailed connecon, see Chapter 4.3.3 Vehicle Connecon.
• A stable network connecon is required for this funcon.
Follow the steps below to proceed.
1. Tap Intelligent Diagnose on the Job Menu.
Note: If the system detects a newer firmware version, it will automatically update it and the following screen
will appear:
Aer the rmware update is nished, tap OK to start reading VIN.

A. , the following screen will appear: