Safety & Accessory
Initial UseDiagnosticsFAQ & Care
Product Prole
59
www.x431.com +86 755 8455 7891
LAUNCH
PAD VII
User Manual
Tap to call out more function options.
Tap Clear
File
Picture: Choose screenshots or pictures to send.
Remote Diagnostic: To start a remote diagnostic session. For details, refer to Chapter 12.1.4.
Camera: Open camera to take pictures.
12.1.4 Launch Remote Diagnosis (Device-To-Device)
The tablet is allowed to initiate remote diagnosis with other diagnostic tools (including but not limited to the
Notes: Before performing this operation, please make sure the following no matter which side sends the
remote request:
• Turn on the vehicle power supply.
• Throle should be in a closed posion.
• The SmartLink C should be properly connected to the vehicle’s DLC and a successful communicaon between the
SmartLink C device and the tablet is required.
Tap Remote Diagnostic, the following pull-down menu will pop up on the screen:
Actions Results
To Next Page
Loading...
