Safety & Accessory
Initial UseDiagnosticsFAQ & Care
Product Prole
31
www.x431.com +86 755 8455 7891
LAUNCH
PAD VII
User Manual
Save to save it as a sample DS
Data Stream SampleUser Info.
E. Actuation Test
This option is used to access vehicle-specific subsystem and component tests. Available test vary by
vehicle manufacturer, year, and model. During the actuation test, the tablet outputs commands to the ECU
in order to drive the actuators, and then determines the integrity of the system or parts by reading the ECU
data, or by monitoring the operation of the actuators, such as switching a injector between two operating
states.
Tap Actuation Test on the test function selection screen, the system will display as follows:
Simply follow the on-screen instructions and make appropriate selections to complete the test. Each time
when an operation is successfully executed, Completed displays.
5.3 Diagnostic History
Generally once a vehicle diagnosis is performed, the tablet will record the every details of diagnostic
process. The History function provides a quick access to the tested vehicles and users can resume from the
last operation, without starting from scratch.
Tap Diagnostic History, all diagnostic records will be listed on the screen in date sequence.
Delete. To delete all historical records, tap
Select All and then tap Delete.
Quick Access to directly navigate to the function selection page of last diagnostic operation. Choose
the desired option to proceed.
To Next Page
Loading...
