Safety & Accessory
Initial Use
Diagnostics
FAQ & Care
Product Prole
30
www.x431.com +86 755 8455 7891
LAUNCH
PAD VII
User Manual
Value: Tap to display the parameters in texts.
Select Sample DS
data stream sampling will be imported into the Standard Range
Note: Before executing this function, you have to sample the values of data stream items and save it as an
sample DS le.
Report: To save the current data as a diagnostic report. All diagnostic reports can be accessed from User
Info -> My Reports -> Health Report.
Record: Tap to start recording diagnostic data. Recorded live data can serve as valuable information to help
you in troubleshooting of vehicle problems. All diagnostic records can be replayed from User Info -> My
Reports -> Recorded Data.
Note: The saved le follows the naming rule: It begins with vehicle type, and then the product S/N and ends
with record starng me (To dierenate between les, please congure the accurate system me).
Help: Tap to view the help information.
Sample DS: This item enables you to customize the standard range of live data stream items and save it as
sample data to overwrite the current standard range.
Tap it to start recording the sample data, and the following screen will appear:
Note: Only the data stream items with measurement units will be recorded.
Tap
to stop recording and navigate to the data revision screen.
To Next Page
Loading...
