Safety & Accessory
Initial Use
Diagnostics
FAQ & Care
Product Prole
14
www.x431.com +86 755 8455 7891
LAUNCH
PAD VII
User Manual
ADAS
This function enables users to perform ADAS (Advanced Driver Assistance
function using the ADAS Activation Card.
Note: This funcon requires the diagnosc tool to work with the specic ADAS
calibraon tool(calibraon tools from other manufacturers will not be supported).
Mall
This module enables you to subscribe some extra software or service
functions that are not integrated in the diagnostic tool online.
Vehicle Coverage To check the vehicle models supported on the tablet.
Maintenance
Abundant maintenance data are available, which helps repair professionals
User Info
Other Modules
4.3 Connections
4.3.1 Preparation
Normal testing conditions
Turn on the vehicle power supply.
Vehicle battery voltage range should be 9-18V or 11-36V and working voltage of the tablet is 5V.
Throttle should be closed at its close position.
connector is required.
4.3.2 DLC Location
For Passenger Vehicles
location. For some Asian and European vehicles, the DLC is located behind the ashtray and the ashtray
for the location.
To Next Page
Loading...
