Safety & Accessory
Initial UseDiagnosticsFAQ & Care
Product Prole
33
www.x431.com +86 755 8455 7891
LAUNCH
PAD VII
User Manual
6 Maintenance Reset
most commonly performed service functions contain:
Oil Reset Service
Steering Angle Calibration
Gear Learning
Electronic Throttle Position Reset
Gearbox Matching
Suspension Calibration
EGR Adaption
Seats Calibration
Tyre Reset
NOx Sensor Reset
There are two methods to reset service lamp: Manual reset or Auto reset. Auto reset follows the principle
follow the on-screen instructions to select appropriate execution options, enter correct data or values, and
perform necessary actions, the system will guide you through the complete performance for various service
operations.
Select “Reset”
Select the desired reset
item (e.g. oil lamp reset
etc.)
Select the car brand
Select the service mode
(The available mode varies
from vehicle to vehicle)
Follow the instructions
on the screen to operate
6.1 Oil Reset Service
This function allows you to perform reset for the engine oil life system, which calculates an optimal oil life
change interval depending on the vehicle driving conditions and climate.
This function can be performed in the following cases:
To Next Page
Loading...
