(b) SYSTEM IDENTIFIER
In this section, you will find information of the equipment related to the system. First, there is
the name or identifier of the equipment, followed by the serial number associated with it.
Below, you will see the version of the equipment's operating system, followed by the version of
the application firmware installed. To upgrade the firmware, you must use the configuration
software.
(c) LOCATION IDENTIFIER
This area shows the information of the physical location of the equipment, previously
introduced in the configuration software.
d ) CURRENT NETWORK SETTINGS
Shows the current network configuration of the equipment.
e ) FACTORY RESET
ATTENTION: This button can perform a factory reset of the equipment. When pressed
it will indicate that all settings will be reset to default and you can Confirm or Abort.
30
www.lda-audiotech.com
To Next Page
Loading...