LeCroy 9300C Series User Manual

14–14
CURSORS/MEASURE & Parameters
MEASURE — Parameters — Pass/Fail
Off/Cursors/Parameters
To select “Parameters”.
mode
To select “Pass” or “Fail”.
testing
For turning testing “Off” or “On”. Testing is turned off in order to
observe only the parameter variations.
CHANGE TEST CONDITIONS
To access the secondary “CHANGE TEST” menu (see next page)
from
To determine the starting point, in screen divisions, for parameter
measurements.
to
To determine the end point in screen divisions.

LeCroy 9300C Series Specifications

General

Brand	LeCroy
Model	9300C Series
Category	Test Equipment
Language	English