LeCroy 9300C Series - Page 270

9304C/9310C/9314C Series,
A–3
9344C/9350C/9354C Series,
A–10
9370C/9374C Series, A–16
9384C Series, A–23
Qualifier. See Qualified Triggers
R
Real Time Clock field, 4–9
Real, Real + Imaginary, Imaginary
FFT, C–10
RECALL W’FORM, 13–4, 13–5
Recalling Setups, 15–2, 15–3
Record, 7–6
Record Length
maximising it, C–8
Record up to, 7–5, 7–6, 7–9
Reducing Noise, 10–3, B–2, B–6
Reference Memories, 10–5
Relative Mode. See
Cursors:Relative
Relative Time Cursors, 10–1
Remote Control, 2–3
Remote Enable, 4–5
Rescale Setup, 10–16
RESET, 9–2, 10–1
Reset (General Instrument), 4–10
Resolution, B–1, B–2, B–3
Resolution Bandwidth
in FFT, 10–17
Return, 1–3
RETURN, 4–4, 4–6
RIS (Random Interleaved
Sampling), 2–2, 7–1, 7–2, 7–5,
8–27
9304C/9310C/9314C Series,
A–2
9370C/9374C Series, A–15
9384C Series, A–22
AUTO, 6–2
SNGL, 6–3
STOP, 6–2
Rise, D–2
Rise 20–80 %, D–10
Rise at Level, D–10
Rise time, 14–7, D–2, D–10
Rising edge, 14–11
Roll Mode, 7–1, 7–3
9304C/9310C/9314C Series,
A–2
9344C/9350C/9354C Series,
A–9
9370C/9374C Series, A–16
9384C Series, A–22
AUTO, 6–2
NORM, 6–2
SNGL, 6–3
STOP, 6–2
Roof, 10–11
in extrema waveforms, 10–3
Root Mean Square (rms), 14–6,
D–2, D–11
RS-232-C, 2–3, 4–7
RS-232-C Connector Pin
Assignments, 12–5
RS-232-C Port, 12–5, A–5, A–19,
A–25
S
Safety, 3–1, A–6, A–13, A–20, A–
26
Safety Symbols, 3–1
Sample Clock, 7–5, 7–6, 7–8
Sampling, 7–1, 7–6, 7–8
FFT, C–1
Sampling Modes, 7–1
Sampling Period
in FFT, 10–18
Sampling Rate, 7–3, 7–5, B–1
Sampling thresholds, 7–6
Saving Setups, 15–1
Scale Factors
9304C/9310C/9314C Series,
A–1
9344C/9350C/9354C Series,
A–8
9370C/9374C Series, A–14