System Commands 5
ACQUISITION
INTERLEAVED, ILVD
Command/Query
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
Response Format
EXAMPLE
RELATED COMMANDS
:1:2 ns/div for Model 9430
The INTERLEAVED command enables or disables random inter-
leaved sampling (RIS). An environment error (see Table 6, page
82) will be generated if the user attempts to turn off RIS when the
time-base setting allows "ON" only, or to turn on RIS when the
time-base setting allows "OFF" only (see table below).
RIS 9410114
9420124130 9450
"ON"
2 ns/dlv 1 ns/dlv
t~
1 ns/dlv
only to to to
20 ns/dlv 20 ns/dlv 5 ns/dlv
Selectable
50 ns/div 50 ns/div 10 ns/dlv
"ON"/"OFF"
to to to
5 p.s/dlv
20 FLs/dlv
5 ~s/dlv
"OFF"
10
~s/div
50 ~s/dlv 10 I~s/dlv
only
to to to
1000 s/div
5000 s/dlv 5000 s/dlv
RIS is not available for sequence mode acquisitions and therefore
an attempt to turn it on in that mode will also result in an environ-
ment error.
The response to the INTERLEAVED? query indicates whether
the oscilloscope is in the RIS mode.
InterLeaVeD <mode>
<mode> := (ON, OFF}
InterLeaVeD?
InterLeaVeD <mode>
The following command sets the oscilloscope into RIS mode.
CMD$ = "ILVD ON": CALL IBWRT(SCOPE%,CMD$)
TIME DIV, TRIG_MODE
103
To Next Page
Loading...
